The Auvidea store is online now and ready to take your order. Thank you for your business.

 

J90-LC compact carrier board for TX1/TX2

SKU: 70761

 99,00

Plus 19% VAT
Delivery Time: ca. 3-4 workdays

The J90-LC is a new compact and low cost carrier board with the lowest vertical size. There are no components on the bottom side. The J90-LC features: 2x UART, 1x CSI-2 (22 pin, 0.5mm pitch for IMX219 camera or B102 module), 100BT Ethernet (capacitive coupled – for short connections within a system or a room), 2x I2C (3.3V), 1x SPI (3.3V), GPIOs (3.3V), 1x micro USB 2.0, and 1x micro USB 3.0. More more features please select the fully populated J90. Optional 40 pin RPi like GPIO header (this header may be added on the bottom side – note: some signals are 1.8V level). The J90-LC starts shipping in June 2017. Please pre-order to reserve your product now.

17 in stock

Additional costs (e.g. for customs or taxes) may occur when shipping to non-EU countries.


The J90-LC is a new compact and low cost carrier board with the lowest vertical size. There are no components on the bottom side. The J90-LC features: 2x UART, 1x CSI-2 (22 pin, 0.5mm pitch for IMX219 camera or B102 module), 100BT Ethernet (capacitive coupled – for short connections within a system or a room), 2x I2C (3.3V), 1x SPI (3.3V), GPIOs (3.3V), 1x micro USB 2.0, and 1x micro USB 3.0. More more features please select the fully populated J90. Optional 40 pin RPi like GPIO header (this header may be added on the bottom side – note: some signals are 1.8V level). The J90-LC starts shipping in June 2017. Please pre-order to reserve your product now.

Cable/mechanical kit (included)
A complimentary assessory kit with the following components is included (from left to right – please refer to the picture above):
– mechanical set with 4 countersunk screws (M3x12), 4 M3 hex nuts, 4 hex spacers (M3x7, 2 inside threads) and 4 hex spacers (M3x7+6, 1 inside thread) to mount the J90-LC with the TX1/TX2 CVM and its heatsink
– 2 AWG28 wire leads red 300mm (one side pre-crimped for housing)
– 2 AWG28 wire leads black 300mm (one side pre-crimped for housing)
– 4 4-pin housings
– 2 6-pin housings
– 9 AWG28 wire leads (red, green, orange, black) 130mm (one side pre-crimped, the other side with single 2.54mm female header)
– power cable with 2 AWG28 wires (red, black) 130mm, single 2.54mm female header pins

Additional cables, housings and mechanical parts may be purchased separately.

Ethernet adapter (not included)
The RJ45 to 4 pin adapter cable is not included but may be purchased separately. It connects the four Ethernet pins (2x TX and 2x RX) to the 100Mbit Ethernet connector.

Documentation Link Type
Technical reference manual 1.2 PDF
3D model (STEP) 38255-2 STP
Firmware download BIN
© 2017 Auvidea GmbH