The Auvidea store is online now and ready to take your order. Thank you for your business.

H100 iMX6 MicroSOM

 

H100 – iMX6 based HDMI encoder
The H100 is the first MicroSOM based encoder designed by Auvidea. The MicroSOM module features a single, dual or quad core iMX6 ARM processor designed by Freescale. This module is used on the HummingBoard and is manufactured by Solid-Run. An on board HDMI to CS-2 bridge (B100) adds an HDMI video input with 4 CSI-2 data lanes..

 

H100 encoder module mounted in prototyping case
The H100 is mounted in the standard prototyping case. High performance thermally conductive thermo silicone pads bridge the gap between the bottom side of the PCB to the aluminum case and the top side of the aluminum heat sink on the processor and the aluminum case for improved cooling and a lower CPU temperature.

 

Technical details

  • general purpose video encoder
  • H.264 hardware encoder integrated in iMX6 processor – base profile only
  • single, dual or quad core iMX6 processor (MicoSom module)
  • 10/100/1000 Ethernet to connect to IP network
  • HDMI to CSI-2 bridge with 4 data lanes (same architecture as B100)
  • HDMI out
  • 2 USB 2.0
  • power: 7 – 17V, 3.5W (5.5×2.5mm jack and internal power connector)
  • size: 77 x 79.3 mm
  • weight: 49 gr (just the H100 carrier board w/o MicroSOM module)

Software

  • Linux based
  • video4linux driver for HDMI to CSI-2 bridge in development

Status

  • rev 1 samples now
© 2017 Auvidea GmbH