The Auvidea store is online now and ready to take your order. Thank you for your business.

Flight controller

These are the first modules which are specifically designed for the new modular motherboards.

 

Modular flight controller
This fight controller is designed for the modular motherboard.

  • micro controller: STM32F427VIT6 wit 2MB Flash
  • fail safe MCU: STM32F103CBT6
  • 14 PWM channels (ch 1-8 and aux 1-6) and S.BUS out
    (on three 6 pin connectors on the bottom)
  • PPM in or S-BUS in on 3 pin connector
  • MPU-9520 and MS5611 sensors (on the bottom)
  • RGB LED plus 2 amber LEDs (1x F103 and 1x F427)
  • ports on 30 pin motherboard connector:
    – serial 4 and 5
    – CAN 1 and 2
    – 2x 5V power
    – USB
    – 2 analog in (power monitor for voltage and current)
    – 10 pin debug connector for debug ports to F103 and F427 (TC2050 by tag-connect.com)
  • size: 40x41mm
  • order code: 38180

 

 

Intel Edison compute module
A compact compute module as a Linux companion to the modular flight controller. Both may be installed on the mini modular motherboard (38181).

  • compute EDISON with dual core 500MHz Intel Atom
  • micro SD card reader on the bottom side
  • two CAN bus controllers with CAN transceivers
    (MCP2515 with SPI interface)
  • 6 pin DF13 (PicoBlade) with 4 PWM channels and 5V
  • 256 byte EEPROM on I2C-6 bus
  • I2C temperature sensor (LM75ADP)
  • quarter size module for modular motherboard
  • 30 pin Molex DF17 connector on bottom:
    – 2x CAN
    – 1x Ethernet
    – 1x USB
    – 1x UART
    – 2x analog input
    – 5V power
  • size: 40x41mm
  • order code: 38178

 

© 2017 Auvidea GmbH